﻿After the staircase time has elapsed, the group or the single device shows the behaviour configured at this point. The output can be set to switch off immediately or alternatively to execute a pre-warning function.

*switch-off*: After the staircase time has elapsed, the group or the single device switches off.

*Activate pre-warning time*: At the end of the staircase time, the group or single device can generate a pre-warning prior to switch-off. The pre-warning, for example, should warn any person still on the staircase that the light will soon be switched off.

*Activate reduced continuous lighting*: At the end of the switch-on time, the gateway activates reduced continuous lighting for the group or single device. The reduction of the lighting to continuous lighting is appropriate, for example, if a certain degree of
artificial light should be switched on permanently in long, dark hallways. Switching to switch-on brightness by activating the staircase function normally takes place by additional presence detectors or motion detectors when people are present in the hallway. The continuous lighting remains permanently active after the switch-on time has elapsed. Only when an ON telegram is received again via the object "Staircase function - start/stop" does the actuator switch back to the switch-on brightness and start counting the switch-on time again.
